Workshop Wonders

• Carb Clean 650 mL
• Rusto Nil 450 mL
• Contact Cleaner 200 mL

NASA Carburetor & Throttle Body Cleaner's unique blend of solvents quickly dissolves gum, varnish, and carbon to restore carburetor and engine performance. It is also a great cleaner for the throttle plate area of fuel-injected vehicles, vacuum piston/cylinder, and PVC valves.

Uses & Benefits:

• It is used in carburetors of gas and petrol automobiles and generators to clean and dissolve gums, varnish, and carbon to restore carburetors and engine performance.
  
• It is also very effective to clean carbon from petrol and natural gas generators and other metal parts.
  
• It can also be used to clean motorcycle carburetors.
  
• It is highly effective in increasing the efficiency of fuel consumption and all types of generators, motorcycles, & cars.

Directions:

• With cold engine, remove air filter.
  
• With engine off, spray on carburetor interior and exterior surface. Let it soak and shortly afterwards spray again.
  
• Spray NASA Carb & Throttle cleaner on automatic choke and carburetor butterfly, then open and close manually until they move freely.
  
• Spray on vacuum piston/cylinder generously.
  
• Spray on all throttle linkage to free action.
  
• For fuel injected vehicles: With the engine running, spray generously into air intake port. Rev engine occasionally until idle returns to normal.
  
• For PVC valves: With engine cold, disconnect hose from the valve. Insert extension tube into valve opening and spray while moving valve back and forth. Start the engine and spray three to four short bursts.

Precautions:

• The contents are highly flammable and under pressure.
  
• Keep away from heat and flame.
  
• Do not puncture or incinerate the can.
  
• Keep away from children.

Rusto Nil spray is a multipurpose special spray for homes, automotive, marine, arms and ammunition, as well as for industrial use. It displaces water, protects against rust and corrosion, and loosens rusted parts. It corrects engine starting problems due to moisture or water, especially in the rainy season, as it removes water and moisture from spark plugs and other electric and electronic parts. It frees sticky and jammed mechanisms of doors, locks, machines, computers, sanitary fittings, and etc.

Directions:

• Shake well before use.
• Disconnect electrical connections.
  
• Spray on desired parts and allow to soak.
  
• For better results, do not wipe off.

Precautions:

• The contents are highly flammable and under pressure.
• Keep away from heat and flame.
• Do not puncture or incinerate the can.
• Keep away from children.

NASA Contact Cleaner is a fluid that works to clean oil, carbon, dust, grease, and dirt on sensitive electronic components, circuit boards, control switches and electronic panels, contact relays, generators, etc.

Directions:

• Use an extension tube, if required.
• Shake well before use.
• Precautions:
• The contents are highly flammable and under pressure.
• Keep away from heat and flame.
  
• Do not puncture or incinerate the can.
  
• Keep away from children.